Alternative flash content

To view this Flash you need Javascript on your browser and updated version of flash player.

Get Adobe Flash player



   Products for gas distribution industry plina

Protective nut cap for heat shrinking foil on the connecting tube of the gas cylinder valve

  • Conforms to the requirements of the Europian standard EN ISO 11114-2:2000 meets the mehanical strength requirements according to the standard ISO 604:1993
  • Thread dimensions are W 21.80 x 1/14 LH
  • Possibility of use with heat shrinkin foil
  • Rubber seal is made from the NBR caoutchouc mixture/PERBUNAN according Norm EN 549:2001
  • Set with or without a free additional rubber seal ø18 x ø11 for the gas regulator
  • The material is Polyamide-Nylon ( PA 6 with 30% of glass fibre, original raw material), it maintains mechanical strength up to 120 bar
  • The material is Polypropylene copolymer ( PPc original raw material), it maintains mechanical strength up to 60 bar
  • Possibility of indicating a serial number,code,date etc.
  • Customized colour,marks and logo
  • Protected industrial design
 

Protective nut cap with the adapter on the connecting tube of gas cylinder valve

  • Main feature of this 'protective nut cap' is a protective ring,which,interlocked with a geared adapter,creates a safety system of gas protection within the cylinder.This primarly refers to the protection of the distributor towards the end customer
  • Conforms to the requirements of the Europian standard EN ISO 11114-2:2000 meets the mehanical strength requirements according to the standard ISO 604:1993
  • Thread dimensions are W 21.80 x 1/14 LH
  • Rubber seal is made from the NBR caoutchouc mixture/PERBUNAN according Norm EN 549:2001
  • Set with or without a free additional rubber seal ø18 x ø11 for the gas regulator
  • The material is Polyamide-Nylon ( PA 6 with 30% of glass fibre, original raw material), it maintains mechanical strength up to 120 bar
  • Possibility of indicating a serial number,code,date etc.
  • Customized colour,marks and logo
  • Protected industrial design
 

Protective nut cap with a string on the connecting tube of the gas cylinder valve

  • Conforms to the requirements of the Europian standard EN ISO 11114-2:2000 meets the mehanical strength requirements according to the standard ISO 604:1993
  • String is attached on the mouth or around the valve
  • Prevents the loss of the protective nut cap
  • Thread dimensions are W 21.80 x 1/14 LH
  • Rubber seal is made from the NBR caoutchouc mixture/PERBUNAN according Norm EN 549:2001
  • Set with or without a free additional rubber seal ø18 x ø11 for the gas regulator
  • The material is Polyamide-Nylon ( PA 6 with 30% of glass fibre, original raw material), it maintains mechanical strength up to 120 bar
  • String is made of PA 6 (original raw material)
  • Possibility of indicating a serial number,code,date etc.
  • Customized colour,marks and logo
  • Protected industrial design
 

Fast change protective nut cap/Plastic cap with spring-lock for lift fork truck’s gas bottle

  • Conforms to the requirements of the European standard EN ISO 11114-2:2000 meets the mehanical strength requirements according to the standard ISO 604:1993
  • Used with liquid phase cylinders (22 mm)
  • Used with cylinders in households and catering (20 mm)
  • The material is Polyamide-Nylon ( PA 6 with 30% of glass fibre, original raw material), it maintains mechanical strength up to 120 bar
  • String made of PA 6 (original raw material)
  • Possibility of indicating a serial number,code,date etc.
  • Customize colour,marks and logo
  • Protected industrial design
 

Protective cover for gas tank (seal)

  • Used for closing (sealing) gas tank valves
  • Possibility of indicating a serial number,code,date etc.
  • Customized colour,marks and logo
 

Rubber seals for gas regulators

  • Conform to the requirements of the European standard EN 549-2001
  • Rubber seal is made of a mixture of NBR rubber/PERBUNAN
  • In compliance with the mehanical strength,hardness and permanent deformation requirements according to the standards ISO 37;ISO 868 and ISO 815
  • In compliance with the requirements of the standard HRN ISO 11114-2:2002,entitled Compatibility of Polymeric Materials/NBR Elastomers and gas
 

Gas hose (for connecting the gas cylinder to the gas regulator)

  • Hoses are made of a rubber mixture based on NBR-rubber
  • They conform to the standard ISO 868,DIN 53505;the standard ISO 37,DIN 53504;the standard ISO
  • 1817,DIN 53521;the standard ISO 37,DIN 5350
  • They are manufactured in five lengths: 0.75,1.00,1.50,2.00 and 3.00 m
 

Gas regulator components

  • Diaphragms
  • Rocker arms
  • Name plates